On September 10, 1993, aboard the Italian Navy destroyer Durand de la Penne, Panerai unveiled the watches that would mark its entry into the civilian market. Among them were the Luminor Ref. 5218-201/A and the Luminor Marina Militare Ref. 5218-202/A, two models that would help make the brand famous far beyond the realm of military watchmaking. Thirty-three years later, Panerai returns to those same references to introduce a significant innovation: the distinctive 1993 case is now available, for the first time, in a 42 mm size.

Thus were born the new Luminor PAM01710, PAM01711, and PAM01714, three interpretations that retain the bold lines and distinctive character of the 1990s models, while featuring more compact proportions than the original 44 mm versions. This is a particularly significant choice for a brand whose identity has always been linked to generously sized watches.
The new diameter does not compromise the technical features that have contributed to the Luminor’s reputation. In fact, the three models share the P.980 automatic movement with a 72-hour power reserve, a single-layer dial inspired by the early civilian models, and water resistance of 50 bar, equivalent to approximately 500 meters. These specifications preserve the watch’s instrumental character, making this new release appealing even to those who have always appreciated the Luminor but found the size of some of its best-known versions too imposing.
From 1993 to the Present: The Birth of the Civilian Luminor
To understand the significance of these new models, we must go back to a pivotal moment in Panerai’s history, when the instruments developed for military use began to win over watch enthusiasts.
Founded in Florence in 1860 as a workshop, retail store, and later a watchmaking school, Panerai began a close collaboration with the Regia Marina in the early decades of the 20th century, developing precision instruments designed to meet the operational needs of the Italian naval forces. In 1935, this partnership led to the development of the Ref. 2533 diving watch prototype, featuring a luminescent Radiomir dial.
For many decades, Panerai’s production remained closely tied to military contracts, with watches and instruments designed to withstand the particularly demanding conditions faced by divers.
The turning point came on September 10, 1993, when, aboard the destroyer Durand de la Penne (D560), the Luminor Ref. 5218-201/A, the Luminor Marina Militare Ref. 5218-202/A, and the Mare Nostrum Ref. 5218-301/A were unveiled aboard the destroyer Durand de la Penne (D560). It marked the beginning of a new era, destined to transform Panerai from a historic supplier of military instruments into a recognized brand on the international watchmaking scene.
The Luminor models presented on that occasion featured a 44 mm case that echoed the characteristic features of the previous 47 mm models, yet offered more angular shapes, sturdy lugs, and more sharply defined edges. The famous crown guard bridge followed the curve of the case middle, becoming one of the watch’s most recognizable features.
Those characteristics would contribute to the Maison’s international success, which was accelerated by its acquisition by the Richemont Group in 1997 and its subsequent debut at the Salon International de la Haute Horlogerie in 1998.
It is precisely this first generation of Luminor watches, designed for the general public, that inspires Panerai today, as the brand revisits the case design and adapts it to a diameter never before offered for this particular configuration.
The historic Luminor case is now available in 42 mm
The main new feature of the PAM01710, PAM01711, and PAM01714 is the case size, which measures 42 mm in diameter, 13.8 mm in thickness, and weighs 126 grams.
The reduction from the 44 mm of the 1993 models applies to a watch whose appearance on the wrist has always been determined not only by its diameter, but also by the shape of the case, the lugs, and the distinctive crown guard.

Panerai has retained the clean lines, sharp edges, and sturdy lugs of the historic models, while adjusting the proportions to make the case more compact. The crown guard retains its curved shape, following the profile of the case middle and preserving the look that has made the Luminor instantly recognizable.
In the PAM01710 and PAM01711, both made of steel, the case features an alternating pattern of polished and satin-finished surfaces, complemented by a polished bezel. The PAM01714, on the other hand, features a steel case with a black DLC coating, a finish that significantly alters its appearance and accentuates the angular lines typical of the Luminor models from the 1990s.


All three models are equipped with a screw-on case back.
The reduction in diameter represents a significant change, especially given the traditional size of Panerai watches on the wrist. However, the 13.8 mm thickness and the dimensions of the crown guard continue to give the new Luminor models a bold character, consistent with their instrumental origins.

The P.980 Automatic Caliber: 72-hour power reserve and testing in six positions
The three new Luminor models are powered by the P.980 automatic caliber, a mechanical movement that offers a three-day power reserve and incorporates technical solutions designed to ensure robustness and consistent timekeeping.
The movement measures 12½ lines in diameter and 4.2 mm in thickness. According to the technical specifications for the three models, it comprises 177 components, 23 jewels, and a single barrel, while the balance wheel oscillates at a frequency of 28,800 vibrations per hour, equivalent to 4 Hz.
Among its key features is the through-balancer bridge, a design that ensures stable support for the regulating organ. The movement is also equipped with an Incabloc shock-absorption device and a seconds-stop function, which allows the seconds hand to be stopped when the crown is pulled out to set the time.
This last feature is directly linked to Panerai’s military heritage. The ability to synchronize watches was, in fact, an important requirement for operators engaged in missions where time coordination played a crucial role.
The P.980 also undergoes timekeeping tests in six positions to verify its performance in different orientations. However, the official documentation does not specify a daily rate tolerance or provide independent timekeeping certification.
The movement’s finishes also deserve attention. The upper plates feature a horizontal satin finish, while the skeletonized oscillating weight is marked with the blue “Officine Panerai” engraving. The bevels alternate between satin-finished and diamond-polished surfaces, details that demonstrate a commitment to quality even in components not visible during use.
Water resistance up to 500 meters: durability remains a priority
One of the most interesting aspects of the new models is their water resistance, rated up to 50 bar—equivalent to a nominal depth of approximately 500 meters.
This is a particularly significant feature given the reduction of the case size to 42 mm, which allows the new Luminor models to maintain high water resistance performance while adopting a more compact design.

Each watch undergoes testing at the Panerai Manufacture in Neuchâtel, Switzerland, where its pressure resistance is verified using equipment that combines air and water tests. This procedure allows for the verification of the case’s and gaskets’ water resistance under pressure, underscoring the attention paid to one of the fundamental characteristics of Panerai watches.
The decision to maintain a water resistance of 500 meters even on a smaller case has a specific purpose: to make the Luminor more versatile without compromising its rated performance.
Single-layer dials and Super-LumiNova: a nod to the first Luminor watches of the 1990s
The connection to the first civilian models is also evident when looking at the dials of the new Luminor watches.
Panerai has opted for a single-layer construction, with printed Arabic numerals and hour markers, reviving a design feature found in the models introduced in 1993.

This choice differs from the sandwich construction used on many of the brand’s watches, in which the upper disc features openings that reveal the luminescent material beneath.
In the new Luminor models, however, the markings are printed directly onto the dial in several steps, followed by the application of Super-LumiNova. The luminescent material creates a slight raised effect, giving the numerals and hour markers a gently convex surface and a three-dimensional effect.

The layout of the markings remains true to the traditional Luminor design, with large Arabic numerals at 12, 3, and 6 o’clock, baton hour markers, and the distinctive small seconds sub-dial at 9 o’clock.
This last feature stems from a specific operational need: to allow divers to immediately check that the watch is functioning properly, even during missions.

There is no date display, a choice that keeps the dial minimalist and true to the aesthetic of the historic models.
The three new models also share a matte finish on their dials, available in black for the PAM01710, green for the PAM01711, and blue for the PAM01714. This feature helps reduce glare and enhances the contrast with the luminescent hour markers.
Panerai Luminor PAM01710: matte black dial and beige strap
The Panerai Luminor PAM01710 is the model that most closely reflects the aesthetic of the earliest civilian models.
The 42 mm polished and satin-finished stainless steel case is paired with a matte black dial, on which the ivory-colored Arabic numerals and hour markers treated with Super-LumiNova stand out. The dark hands echo the timepiece’s minimalist character, while the small seconds sub-dial at 9 o’clock retains the traditional layout of the dial.
The beige canvas strap, with tone-on-tone stitching and leather reinforcements at the holes, completes a color scheme that is particularly consistent with the Maison’s military origins.

The trapezoidal pin buckle is crafted from satin-finished steel.
Of the three new models, the PAM01710 is the one that most immediately evokes the character of the 1993 Luminor models, thanks to the combination of a black dial, light-colored hour markers, and a stainless steel case.
Price: 6,500 euro.
Panerai Luminor PAM01711: Matte green dial and matching strap
The Panerai Luminor PAM01711 shares the 42 mm stainless steel case, the P.980 automatic movement, and the same technical specifications as the previous model, distinguishing itself primarily through its color scheme.
The matte green dial features ivory-colored Arabic numerals and hour markers treated with Super-LumiNova, accompanied by a small seconds sub-dial at 9 o’clock.
The green hue evokes the military imagery traditionally associated with Panerai watches, while the matte finish minimizes glare and enhances the readability of the dial.

The green canvas strap echoes the dial’s color scheme, featuring tone-on-tone stitching, leather reinforcements around the holes, and a trapezoidal buckle in satin-finished steel.
Compared to the black version, the PAM01711 offers a more uniform color scheme, giving the Luminor a sporty character without straying from the brand’s tradition.
Price: 6,500 euro.
Panerai Luminor PAM01714: Black DLC-coated steel and matte blue dial
The Panerai Luminor PAM01714 rounds out the new collection by introducing a case finish that differs from the two stainless steel versions.
The 42 mm case is crafted from steel with a black DLC coating, paired with a bezel featuring the same finish. The matte blue dial features beige Arabic numerals and hour markers treated with Super-LumiNova, while the blue canvas strap echoes the dial’s hue.
The trapezoidal pin buckle is also made of DLC-coated steel, maintaining a finish that matches the case.
DLC treatment , which stands for Diamond-Like Carbon, is a carbon-based coating characterized by high surface hardness and resistance to wear, abrasion, and corrosion.

In the PAM01714, it is applied using a plasma-assisted chemical vapor deposition process, known as Plasma-Assisted Chemical Vapor Deposition. This process produces a durable black surface while preserving the steel as the structural material of the case.
The dark finish highlights the Luminor’s sharp edges and angular shapes, while the contrast with the matte blue dial and beige markings gives the watch a more contemporary look.
The DLC coating offers greater surface resistance than untreated steel, though it does not make the watch completely immune to scratches or damage.
Price: 7,500 euro.
Canvas Straps and the PAM Click Release System
To complement the new models, Panerai has developed dedicated canvas straps, choosing a lightweight and durable textile material that aligns with the collection’s sporty character.
Each strap features leather reinforcements around the holes, a design intended to protect the areas most prone to wear and tear during use.
The three color options correspond to their respective models: beige for the PAM01710, green for the PAM01711, and blue for the PAM01714. The dimensions are the same for all models, with a width of 22 mm between the lugs and 20 mm at the buckle.
The part numbers for the standard straps are MXE0X5N7 for the PAM01710, MXE0X6J6 for the PAM01711, and MXE0X77H for the PAM01714. Each watch is delivered in Panerai’s standard packaging, made from recycled paper and complete with a travel case.
Prices and Availability of the New Panerai Luminor 42 mm
The new Panerai Luminor models PAM01710, PAM01711, and PAM01714 are priced at 6,500 euro each for the PAM01710 and PAM01711, both featuring stainless steel cases, and 7,500 euro for the PAM01714, which features a case with a black DLC coating.
The 1993 Luminor Gets a New Size
With the new PAM01710, PAM01711, and PAM01714, Panerai returns to one of the most important chapters in its history, reviving the case design that marked the debut of its watches on the civilian market.
The decision to offer this particular 42 mm configuration for the first time expands the possibilities for wearing a Luminor without sacrificing the features that have made it instantly recognizable over the past thirty-three years.
The crown guard, square lugs, single-layer dial, and small seconds sub-dial at 9 o’clock maintain the connection to the 1993 models, while the P.980 automatic movement and 500-meter water resistance confirm its technical qualities.

The three versions also offer different aesthetic interpretations: the PAM01710 remains the closest to the spirit of the originals, the PAM01711 emphasizes its connection to military tradition with its matte green dial, and the PAM01714 features a black DLC finish paired with a matte blue dial.
It remains to be seen how it actually fits, especially for those who have always found the 44 mm and larger Luminor models to be too bulky. The reduction in diameter is a significant change, but how it sits on the wrist also depends on the thickness of the case and the shape of the lugs.
Thirty-three years after the debut of the first civilian Luminor models, Panerai demonstrates just how timeless that design remains. The new size expands its range of uses while retaining the details that have helped make it one of the most recognizable watches in contemporary watchmaking.
Are you looking for the perfect gift? Explore our online store and discover the entire collection by IWS – Italian Watch Spotter!
For all the latest updates on the world of watchmaking, follow us on Instagram and visit our YouTube channel.